With the development of society, various building panels have appeared in our lives, and this is one of the more common panels. Solid polycarbonate sheet is made of polycarbonate, also known as PC solid sheet. Polycarbonate solid sheets are light in weight and highly transparent, and have many advantages.
1) Light transmittance: The light transmittance of PC polycarbonate solid sheet can reach up to 89%, which can match the beauty of glass. UV coated panels will not produce yellowing, atomization, or poor light transmission when exposed to sunlight. After ten years, the light transmission loss is only 10%. The PVC loss rate is as high as 15%-20%, and the glass fiber is 12%. %-20%.
(2) Impact resistance: The impact strength is 250-300 times that of ordinary glass, 30 times that of acrylic plates of the same thickness, and 2-20 times that of tempered glass. There will be no cracks when dropped two meters below with a 3kg hammer, and it is “unbreakable” “Glass” and “Sounding Steel”.
(3) Anti-ultraviolet: One side of the PC sheet is co-extruded with an anti-ultraviolet (UV) coating, and the other side has anti-condensation treatment, integrating the functions of anti-ultraviolet, heat insulation and anti-fog droplets. It can block the passage of ultraviolet rays and is suitable for protecting valuable artworks and exhibits from ultraviolet damage.
(4) Light weight: The specific gravity is only half that of glass, saving the cost of transportation, handling, installation and supporting frames.
(5) Flame retardant: The national standard GB50222-95 confirms that PC endurance board is flame retardant level one, that is, B1 level. The PC board’s own ignition point is 580°C. It will self-extinguish after being removed from the fire. It will not produce toxic gases when burning and will not contribute to the spread of the fire.
(6) Flexibility: It can be cold-bent at the construction site according to the design drawings, and installed into arches, semi-circular roofs and windows. The minimum bending radius is 175 times the thickness of the plate used, and hot bending is also possible.
(7) Sound insulation: PC endurance board has obvious sound insulation effect and has better acoustic insulation than glass and acrylic panels of the same thickness. Under the same thickness, the sound insulation capacity of PC endurance board is 5-9DB higher than that of glass. . Internationally, it is the preferred material for highway noise barriers.
(8) Energy saving: Keep cool in summer and heat in winter. PC endurance board has a lower thermal conductivity (K value) than ordinary glass and other plastics, and the thermal insulation effect is 7%-25% higher than the same glass. PC endurance board Thermal insulation is up to 49%. This greatly reduces heat loss and is an environmentally friendly material used in buildings with heating equipment.
(9) Temperature adaptability: PC sheets do not become cold brittle at -40°C, do not soften at 125°C, and have no significant changes in their mechanical and mechanical properties in harsh environments.
(10) Weather resistance: Solid polycarbonate sheet can maintain the stability of various physical indicators in the range of -40℃ to 120℃. After 4,000 hours of artificial climate aging test, the yellowing degree was 2 and the light transmittance reduction was only 0.6%.
(11) Anti-condensation: When the outdoor temperature is 0℃, the indoor temperature is 23℃, and the indoor relative humidity is lower than 80%, there will be no condensation on the inner surface of the material. Dew will flow along the surface of the board and will not drip.
(12) Simple and convenient, not as bulky as traditional materials, it has been widely used in various fields since its inception.
Company Name: Baoding Xinhai Plastic Sheet Co.,ltd
Contact Person: Sale Manager
Email: admin@cnxhpcsheet.com
Phone/Wechat/Whatsapp: +8619932587617
Country: China
Website: https://www.xhplasticsheet.com/
Post time: Feb-29-2024